loader image
Skip to content

FireProtect Plus


Wireless fire detector with temperature and carbon oxide sensors that monitors security in the room twenty four hours a day and immediately notifies of dangerous CO levels, smoke and sharp jumps in temperature.

Authentication to prevent forgery
Jamming detection and communication channels encryption
Tampering alarm
SKU: N/A Category:

Principle of operation

The device detects smoke by means of a camera with a photoelectric sensor. An additional chemical element detects carbon oxide and raises the alarm.


It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

See the full manual


Black, White


Radio channel smoke detector with temperature sensor and built-in siren

Type of detector


Installation method



Operates independently or with all Ajax hubs, range extenders, ocBridge Plus, uartBridge


Photoelectric, CO and temperature sensors

Activation threshold

+59°С ±2°С

Type of notification


Volume of built-in siren

85 dB

Alarm signal delivery time

0,15 s

False alarm filter


Interconnected alarms


Power supply

Backup power supply: battery CR2032, Battery: Two CR2 batteries, 3 V

Battery life

Up to 4 years

Jeweller radio technology

Block encryption based on AES algorithm, Communication range with central unit — up to 1,300 m in an open space, Detector scanning period from 12 to 300 sec, Operating frequencies — 868.0 – 868.6 MHz, Self-adjusting RF output power — up to 25 mW, Two-way communication between devices

Additional temp. sensor


Operating temp. range

From 0°С to +65°С

Operating humidity

Up to 80%


Jamming detection, Protection against fraud, Tamper-resistant

Remote configuration and testing



132 × 132 × 31 mm


220 g


Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.

Service life

10 years

Complete set

1 x backup battery CR2032 (pre-installed), 2 x CR2 batteries (pre-installed), FireProtect Plus detector, Installation set, SmartBracket mounting panel, User's guide