loader image
Skip to content

Motion Cam Outdoor


MotionCam Outdoor recognizes intrusion from the very first steps on the territory and confirms it with an animated series of photos. Visual verification helps to instantly ascertain the situation, saving users from concerns, and security companies from unnecessary patrol dispatches.

Authentication to prevent forgery
Jamming detection and communication channels encryption
Tampering alarm
Security Grade Compliance

Combining the best optics, fast processor and advanced software algorithms, MotionCam Outdoor takes informative pictures in any weather, day or night.

MotionCam Outdoor is equipped with two independent PIR sensors, the signals of which are analyzed by a two-step LISA algorithm. When both sensors detect motion, LISA performs correlation and spectral analysis of the signals, which helps to instantly distinguish real threats from interferences.

Whenever MotionСamOutdoor detects motion, LISA analyses and compares signal forms from two sensors in real-time. If forms are similar, the alarm is activated.


Installation and set up

The process of connecting and configuring MotionCam Outdoor saves installation engineers time in the best possible way. To add a detector to the system, all you have to do is scan the QR code with the Ajax app, assign a name and a room to it. Configure the device in the app in real time,test detection zones and communication. If necessary, the detector can be disabled or its system parameters can be reconfigured remotely, without visiting the site.

See the full manual


Electro-optical radio channel security detector

Tipo de detetor


Método de instalação

Outdoors / indoors

Altura de inst. recomendada

0,8 – 1,3 m


Hub 2, Hub 2 Plus, Not compatible with ReX radio signal range extender

Elemento sensor

2 × PIR sensor

Distância deteção mov.

Adjustable, from 3 to 15 m

Imunidade a animais

Animals up to 80 cm tall


Adjustable, 3 levels

Angulo de visão do detetor de movimentos

Horizontal — 90° Vertical — 80°

Ângulo da câmara

Horizontal — 105° Vertical — 50°

Distorção da televisão

Barrel, –17%

Fotografia em caso alarme

Photo resolution: 320 × 176 pixels (by default) 640 × 352 pixels, Shooting series up to 5 photos

fotografar no escuro


Alimentação eléctrica

4 CR123A batteries

Tensão de alimentação

6 V

Vida útil da pilha

Up to 3 years (up to 2.5 years if “Delay when entering” setting is activated)

Tecnologia de rádio Jeweller

Block encryption with a dynamic key, Communication range with a hub — up to 1,700 m in an open space, Detector polling period — 12−300 s, Frequency hopping, Operating frequencies — 868.0–868.6 MHz3, Self-adjusting RF output power — up to 25 mW, Two-way communication between hub and device

Transmissão sinal alarme

0,15 s

Tecnologia de rádio Wings

Photo delivery time with a default settings: up to 9 seconds, Transmission of a series of photos

Sensor de temperatura


Temp. funcionamento

From –25°С to +60°С

Humidade de funcionamento

Up to 95%

Classe de proteção



Anti-masking, Jamming detection, Protection against forgery, Tamper-resistant

Configuração e testes à distância


Compatibilidade com CRA

CMS connectivity: Contact ID, SIA (DC-09)


206 × 108 × 93 mm


470 g


Within 24 months from the date of sale

Conjunto completo

4 × CR123A batteries (pre-installed), Hood visor, Installation kit, MotionCam Outdoor motion detector, SmartBracket mounting panel, User's guide